CRUISE CONTROL MAIN SWITCH INSTALLATION

PROCEDURE

1. Click here

   INSTALL CRUISE CONTROL MAIN SWITCH

   
   

   1. Connect the connector and install the cruise control switch wire to the cruise control main switch.

   2. 

      *1	Cruise Control Switch Wire
      *a	Rib

      Pass the cruise control switch wire under the rib as shown in the illustration, and temporarily install the cruise control main switch with the 2 screws.

   3. Tighten the 2 screws in the order as shown in the illustration to install the cruise control main switch.

   4. Connect the connector.

2. Click here

   INSTALL HORN BUTTON ASSEMBLY

   Click here

3. Click here

   CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

4. Click here

   CHECK SRS WARNING LIGHT

   for Type A:

   Click here

   for Type B:

   Click here

   for Type C:

   Click here