CRUISE CONTROL SYSTEM, Diagnostic DTC:P1578

DTC Code DTC Name
P1578 Brake System Malfunction

DESCRIPTION

This DTC is stored when the brake control system has a problem. Check the brake control system when this DTC is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
P1578 Brake System Malfunction There is a brake control system malfunction
  • Vehicle stability control system*1

  • Anti-lock brake system*2

  • ECM


CAUTION / NOTICE / HINT

Note

This DTC may be output by the brake control system at the same time. In that case, perform troubleshooting for the brake control system first.

PROCEDURE


  1. CHECK FOR DTCs (BRAKE CONTROL SYSTEM)


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Chassis / ABS/VSC/TRC / Trouble Codes.

    5. Check for DTCs.


      Chassis > ABS/VSC/TRC > Trouble Codes
      Result
      Result Proceed to
      DTCs are not output A
      Vehicle stability control system DTCs are output (w/ Vehicle Stability Control System) B
      Anti-lock brake system DTCs are output (w/o Vehicle Stability Control System) C

    B
    C
    A
  2. CHECK FOR DTCs (CRUISE CONTROL SYSTEM)


    1. Clear the DTCs.

      Click here


      Powertrain > Cruise Control > Clear DTCs
    2. Perform the following to make sure that the DTC detection conditions are met.

      Tech Tips

      If the detection conditions are not met, the malfunction cannot be detected.


      1. Drive the vehicle at a speed for which cruise control operation is possible.

      2. Turn the cruise control system on using the cruise control main switch (ON/OFF button).

      3. Push the cruise control main switch to -/SET to begin control of vehicle speed using the cruise control system.

    3. Check the DTCs.

      Click here


      Powertrain > Cruise Control > Trouble Codes
      Result
      Result Proceed to
      DTC P1578 is not output A
      DTC P1578 is output B

    A
    B