CRUISE CONTROL SYSTEM FREEZE FRAME DATA

CHECK FREEZE FRAME DATA (READ BY GTS)

1. Connect the GTS to the DLC3.

2. Turn the ignition switch to ON.

3. Turn the GTS on.

4. Enter the following menus: Powertrain / Cruise Control / Trouble Codes.

   
   
   1. Powertrain > Cruise Control > Trouble Codes
   2. 
      
   3. 
      

5. From the DTC screen, select the DTC (snow icon displayed) to which freeze frame data is recorded.

LIST OF FREEZE FRAME DATA

1. Powertrain > Cruise Control

   Tester Display	Measurement Item	Range	Normal Condition	Diagnostic Note
   CCS Vehicle Spd	Vehicle speed	Min.: 0 km/h (0 mph) Max.: 255 km/h (158 mph)	Actual vehicle speed	-
   CCS Mem Vehicle Spd	Stored vehicle speed	Min.: 0 km/h (0 mph) Max.: 255 km/h (158 mph)	Actual stored vehicle speed	-
   Throttle Opening Angle	Required throttle opening amount	Min.: 0% Max.: 100%	Required throttle opening angle	for 1GD-FTV, 2GD-FTV
   Cruise Control	Cruise control system active condition	ON or OFF	ON: Cruise control activated OFF: Cruise control deactivated	-
   Main SW M-CPU	Cruise control main switch signal (Main CPU)	ON or OFF	ON: Cruise control main switch on OFF: Cruise control main switch off	-
   CCS Ready M-CPU	Cruise control system standby condition (Main-CPU)	ON or OFF	ON: Cruise control main switch (Main CPU) SET OFF: Cruise control main switch (Main CPU) UNSET	-
   CCS Indicator M-CPU	Cruise control system standby condition (Main-CPU)	ON or OFF	ON: Cruise control indicator light turns on OFF: Cruise control indicator light turns off	-
   Cancel Switch	CANCEL switch signal	ON or OFF	ON: CANCEL switch on OFF: CANCEL switch off	-
   SET/COAST Switch	-SET switch signal	ON or OFF	ON: -SET switch on OFF: -SET switch off	-
   RES/ACC Switch	+RES switch signal	ON or OFF	ON: +RES switch on OFF: +RES switch off	-
   Stop Light Switch 1	Stop light switch signal	ON or OFF	ON: Brake pedal depressed OFF: Brake pedal released	-
   Stop Light Switch 2	Stop light switch signal	ON or OFF	ON: Brake pedal depressed OFF: Brake pedal released	-
   Cruise Operation Status	Shift lever position signal	ON or OFF	ON: Shift lever in D OFF: Shift lever not in D	-
   Cruise Request Driving Force	Cruise request torque signal	Min.:-51.2 kN Max.: 50.8 kN	Differs according to the cruise control system condition	for 1GR-FE, 2TR-FE
   Brake Cancel Switch	Brake cancel signal	ON or OFF	ON: Brake pedal depressed OFF: Brake pedal released	-

2. 
   
   10. 
       
   11. 
       
   12. 
       
   13. 
       
   14. 
       
   15. 
       
   16. 
       
   17. 
       
   18. 
       
   19. 
       
   20. 
       
   21. 
       
   22. 
       
   23. 
       
   24.