VALVE BODY ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the valve body assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedures Effects/Inoperative when not Performed Link

  • Transmission valve body assembly

  • Any of the shift solenoid valves

 Reset memory Large shift shock

for 1GR-FE: Click here

for 1GD-FTV: Click here

for 2GD-FTV: Click here

for 2TR-FE: Click here

PROCEDURE


  1. DISCONNECT TRANSMISSION WIRE

    Click here

  2. REMOVE VALVE BODY OIL STRAINER ASSEMBLY


    1. A01SHSV

      Remove the 3 bolts and valve body oil strainer assembly from the transmission valve body assembly.

  3. REMOVE TRANSMISSION VALVE BODY ASSEMBLY


    1. A01SH4W

      Remove the bolt, detent spring cover and detent spring from the transmission valve body assembly.

    2. A01SH6F

      Remove the 12 bolts and transmission valve body assembly from the automatic transmission case sub-assembly.

  4. REMOVE MANUAL VALVE


    1. A01SJK8

      Remove the manual valve from the transmission valve body assembly.

  5. REMOVE TRANSMISSION CASE GASKET


    1. B0024IY

      Remove the 2 transmission case gaskets from the automatic transmission case sub-assembly.