Click here

TRANSMISSION CONTROL CABLE INSTALLATION

Click here
Click here

PROCEDURE


  1. Click here

    INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Install the transmission control cable from outside the vehicle body and attach the 3 claws of the cable retainer.

    2. Install the 2 nuts.

      5.5 N*m 56 kgf*cm 49 in.*lbf
    3. A01LDFN

      Connect the transmission control cable support to the vehicle body with the nut as shown in the illustration.

      5.5 N*m 56 kgf*cm 49 in.*lbf

    4. Connect the ground wire to the vehicle body with the nut as shown in the illustration.

      8.3 N*m 85 kgf*cm 73 in.*lbf
    5. B0025ESN02

      Turn the control shaft lever LH clockwise until it stops, and then return the control shaft lever counterclockwise 2 notches to N.

    6. Connect the transmission control cable to the transmission control cable bracket with a new clip, and then connect the cable end to the control shaft lever LH with the nut.

      14 N*m 143 kgf*cm 10 ft.*lbf
  2. Click here

    CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

    Click here

  3. Click here

    INSPECT SHIFT LEVER POSITION

    Click here

  4. Click here

    INSTALL NO. 1 CONSOLE BOX DUCT (w/ Rear Air Duct)

    Click here

  5. Click here

    INSTALL CONSOLE BOX ASSEMBLY

    Click here