OIL PRESSURE SWITCH REMOVAL

Click here

CAUTION / NOTICE / HINT

Click here

PROCEDURE

1. Click here

   REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY (for 4WD and Pre-Runner)

2. Click here

   REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY (for 4WD and Pre-Runner)

3. Click here

   DRAIN ENGINE OIL

   Click here

4. Click here

   REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY

   CAUTION:

   To prevent burns, do not remove the engine oil pressure switch assembly while the engine is hot.

   
   

   1. Disconnect the engine oil pressure switch connector.

   2. 

      Using a 24 mm deep socket wrench, remove the engine oil pressure switch assembly from the oil filter bracket.