OIL PRESSURE SWITCH REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

To prevent burns, do not remove the engine oil pressure switch assembly while the engine is hot.

B0025VT

PROCEDURE


  1. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY (for 4WD and Pre-Runner)

  2. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY (for 4WD and Pre-Runner)

  3. DRAIN ENGINE OIL

    Click here

  4. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY

    CAUTION:

    To prevent burns, do not remove the engine oil pressure switch assembly while the engine is hot.


    1. Disconnect the engine oil pressure switch connector.

    2. B0027WB

      Using a 24 mm deep socket wrench, remove the engine oil pressure switch assembly from the oil filter bracket.