THERMOSTAT INSTALLATION

PROCEDURE

1. Click here

   INSTALL WATER INLET SUB-ASSEMBLY WITH THERMOSTAT

   
   

   1. Install a new gasket to the water inlet sub-assembly with thermostat.

   2. Install the water inlet sub-assembly with thermostat to the water inlet assembly with the 3 nuts.

      9.0 N*m

      92 kgf*cm

      80 in.*lbf

2. Click here

   CONNECT RADIATOR HOSE OUTLET

   
   

   1. Connect the radiator hose outlet to the water inlet sub-assembly with thermostat, and slide the hose clamp to secure the hose.

      Note:

      Connect the radiator hose outlet so that the paint mark on the radiator hose outlet is aligned with the protrusions of the water inlet sub-assembly with thermostat.

      Click here

3. Click here

   ADD ENGINE COOLANT

   Click here

4. Click here

   INSPECT FOR COOLANT LEAK

   Click here

5. Click here

   INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY (for 4WD and Pre-Runner)

   Click here