Click here

WATER PUMP REMOVAL

Click here
Click here

CAUTION / NOTICE / HINT

CAUTION:
B0069BK

Do not remove the radiator cap sub-assembly, cylinder block drain cock plugs or radiator drain cock plug while the engine and radiator assembly are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.

Click here

PROCEDURE


  1. Click here

    DRAIN ENGINE COOLANT

    Click here

  2. Click here

    REMOVE FAN SHROUD

    Click here

  3. Click here

    REMOVE GENERATOR ASSEMBLY

    Click here

  4. Click here

    DISCONNECT COOLER COMPRESSOR ASSEMBLY

    Click here

  5. Click here

    REMOVE WATER INLET ASSEMBLY


    1. A01SB54

      Slide the 2 hose clamps and disconnect the radiator hose inlet and radiator hose outlet from the water inlet assembly.

    2. A01SEEI

      Slide the 5 hose clamps and disconnect the water by-pass hose, No. 2 water by-pass hose, No. 3 water by-pass hose, No. 4 water by-pass hose and No. 5 water by-pass hose from the water inlet assembly.

    3. A01SBED

      Remove the 5 bolts and water inlet assembly from the timing chain cover sub-assembly.

    4. A01SCS2

      Remove the O-ring from the water outlet pipe.

    5. Remove the gasket from the engine water pump assembly.

  6. Click here

    REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

    Click here

  7. Click here

    REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY


    1. A01SB32

      w/ Idler Pulley Cover Plate:


      1. Remove the 2 bolts, 2 idler pulley cover plates, 2 No. 2 idler pulleys and 2 No. 2 idler pulley cover plates.

    2. w/o Idler Pulley Cover Plate:


      1. Remove the 2 bolts, 2 No. 2 idler pulleys and 2 No. 2 idler pulley cover plates.

    3. for Integrated Type:


      1. Remove the 2 bolts and 2 No. 2 idler pulleys.

  8. Click here

    REMOVE ENGINE WATER PUMP ASSEMBLY


    1. A01SEOQ

      Remove the 17 bolts, engine water pump assembly and gasket from the timing chain cover sub-assembly.