INTAKE MANIFOLD COMPONENTS
ILLUSTRATION
| *A | w/ EGR System without EGR Cooler | - | - |
| *1 | EGR VALVE ADAPTER | *2 | NO. 1 EGR PIPE SUB-ASSEMBLY |
| *3 | NO. 3 WATER BY-PASS PIPE SUB-ASSEMBLY | *4 | NO. 4 WATER BY-PASS PIPE SUB-ASSEMBLY |
| *5 | EGR PIPE STAY | *6 | NO. 4 FUEL HOSE |
| *7 | NO. 9 WATER BY-PASS HOSE | *8 | GASKET |
| *9 | NO. 8 WATER BY-PASS HOSE | *10 | WATER HOSE |
| *11 | NO. 7 WATER BY-PASS HOSE | *12 | ENGINE WIRE BRACKET |
| *13 | STUD BOLT | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *A | w/o EGR System | - | - |
| *1 | EGR VALVE ADAPTER | *2 | NO. 3 WATER BY-PASS PIPE SUB-ASSEMBLY |
| *3 | NO. 4 WATER BY-PASS PIPE SUB-ASSEMBLY | *4 | EGR PIPE STAY |
| *5 | NO. 4 FUEL HOSE | *6 | NO. 7 WATER BY-PASS HOSE |
| *7 | ENGINE WIRE BRACKET | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | w/ DPF | *B | w/ Pressurized Fuel Filter |
| *1 | ENGINE OIL LEVEL DIPSTICK GUIDE | *2 | FUEL INLET PIPE SUB-ASSEMBLY |
| *3 | INTAKE MANIFOLD | *4 | MANIFOLD STAY |
| *5 | NO. 2 FUEL PIPE | *6 | NO. 2 NOZZLE LEAKAGE PIPE ASSEMBLY |
| *7 | NO. 3 FUEL PIPE | *8 | NO. 4 FUEL PIPE SUB-ASSEMBLY |
| *9 | WIRING HARNESS CLAMP BRACKET | *10 | NO. 1 INJECTION PIPE CLAMP |
| *11 | NO. 2 INJECTION PIPE CLAMP | *12 | ENGINE OIL LEVEL DIPSTICK |
| *13 | ENGINE WIRE | *14 | WIRE HARNESS |
| *15 | VACUUM HOSE | *16 | GASKET |
| *17 | O-RING | *18 | UNION BOLT |
| *19 | SUPPLY PUMP HOLLOW SCREW | *20 | NO. 2 FUEL PIPE CLAMP |
| *a | w/ No. 2 Fuel Pipe Clamp | - | - |
 |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | |
N*m (kgf*cm, ft.*lbf): Specified torque |
| * | For use with SST or union nut wrench | ● | Non-reusable part |