EXHAUST MANIFOLD W/ TURBOCHARGER COMPONENTS
ILLUSTRATION
| *A | w/ Viscous Heater | *B | for 4WD and Pre-Runner |
| *1 | AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE | *2 | AIR CLEANER CASE SUB-ASSEMBLY |
| *3 | AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY | *4 | FAN SHROUD |
| *5 | NO. 1 AIR HOSE | *6 | NO. 1 ENGINE UNDER COVER ASSEMBLY |
| *7 | NO. 1 OIL RESERVOIR BRACKET | *8 | NO. 1 RADIATOR HOSE |
| *9 | NO. 1 VISCOUS HEATER BRACKET SUB-ASSEMBLY | *10 | NO. 2 AIR TUBE |
| *11 | NO. 4 AIR HOSE | *12 | RADIATOR RESERVOIR |
| *13 | VANE PUMP OIL RESERVOIR ASSEMBLY | *14 | VISCOUS HEATER WITH MAGNET CLUTCH ASSEMBLY |
| *15 | WATER HOSE SUB-ASSEMBLY | *16 | FAN AND GENERATOR V BELT |
| *17 | FAN PULLEY | *18 | FLUID COUPLING ASSEMBLY |
| *19 | NO. 1 WATER BY-PASS HOSE | *20 | VISCOUS V BELT |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | w/o EGR Cooler | - | - |
| *1 | EXHAUST PIPE SUPPORT STAY | *2 | NO. 1 EXHAUST MANIFOLD HEAT INSULATOR |
| *3 | NO. 1 TURBO INSULATOR | *4 | NO. 2 EXHAUST PIPE SUPPORT STAY |
| *5 | TURBINE OUTLET ELBOW | *6 | EXHAUST PIPE CLAMP |
| *7 | GASKET | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *A | for Cold Specification Vehicles | *B | w/o DPF |
| *1 | EXHAUST MANIFOLD | *2 | NO. 1 EGR PIPE SUB-ASSEMBLY |
| *3 | NO. 1 WATER BY-PASS PIPE | *4 | NO. 3 WATER BY-PASS PIPE |
| *5 | PCV PIPE | *6 | TURBO OIL OUTLET PIPE |
| *7 | TURBOCHARGER STAY | *8 | TURBOCHARGER SUB-ASSEMBLY |
| *9 | COLLAR | *10 | GASKET |
| *11 | PLATE WASHER | *12 | TURBO OIL OUTLET HOSE |
| *13 | WIRE HARNESS | *14 | NO. 20 WATER BY-PASS HOSE |
| *15 | WATER HOSE | *16 | STUD BOLT |
 |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | |
N*m (kgf*cm, ft.*lbf): Specified torque |
| ● | Non-reusable part | - | - |
ILLUSTRATION
| *A | except Cold Specification Vehicles | *B | w/ DPF |
| *C | w/ EGR System | *D | w/o EGR System |
| *1 | EGR HOLE COVER PLATE | *2 | EXHAUST MANIFOLD |
| *3 | NO. 1 EGR PIPE SUB-ASSEMBLY | *4 | NO. 1 WATER BY-PASS PIPE |
| *5 | NO. 3 WATER BY-PASS PIPE | *6 | PCV HOSE |
| *7 | TURBO OIL OUTLET PIPE | *8 | TURBOCHARGER STAY |
| *9 | TURBOCHARGER SUB-ASSEMBLY | *10 | COLLAR |
| *11 | GASKET | *12 | PLATE WASHER |
| *13 | TURBO OIL OUTLET HOSE | *14 | WIRE HARNESS |
| *15 | STUD BOLT | - | - |
| |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | |
N*m (kgf*cm, ft.*lbf): Specified torque |
| ● | Non-reusable part | - | - |
ILLUSTRATION
| *A | for Cold Specification Vehicles | *B | w/o DPF |
| *1 | COMPRESSOR INLET ELBOW | *2 | COMPRESSOR OUTLET ELBOW |
| *3 | NO. 1 TURBO WATER PIPE SUB-ASSEMBLY | *4 | TURBO OIL INLET PIPE SUB-ASSEMBLY |
| *5 | TURBO WATER HOSE | *6 | TURBOCHARGER SUB-ASSEMBLY |
| *7 | STUD BOLT | *8 | COMPRESSOR INLET ELBOW STAY |
| *9 | GASKET | *10 | UNION BOLT |
| |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | |
N*m (kgf*cm, ft.*lbf): Specified torque |
| ● | Non-reusable part | - | - |
ILLUSTRATION
| *A | except Cold Specification Vehicles | *B | w/ DPF |
| *1 | COMPRESSOR INLET ELBOW | *2 | COMPRESSOR OUTLET ELBOW |
| *3 | NO. 1 TURBO WATER PIPE SUB-ASSEMBLY | *4 | TURBO OIL INLET PIPE SUB-ASSEMBLY |
| *5 | TURBO WATER HOSE | *6 | TURBOCHARGER SUB-ASSEMBLY |
| *7 | STUD BOLT | *8 | COMPRESSOR INLET ELBOW STAY |
| *9 | GASKET | *10 | UNION BOLT |
| *11 | HOSE CLAMP | - | - |
| |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | |
N*m (kgf*cm, ft.*lbf): Specified torque |
| ● | Non-reusable part | - | - |
ILLUSTRATION
| *1 | TURBOCHARGER NOZZLE VANE CONTROL ACTUATOR | *2 | TURBOCHARGER VANE CONTROL ROD SUB-ASSEMBLY |
| *3 | COMPRESSOR WITH BEARING HOUSING SUB-ASSEMBLY | *4 | E-WASHER |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |