PCV VALVE INSPECTION

PROCEDURE


  1. INSPECT PCV VALVE SUB-ASSEMBLY


    1. Install a clean hose to the PCV valve sub-assembly.

    2. A01LBK9C07
      *a Clean Hose
      B0068HS Air

      Check the PCV valve operation.


      1. Blow air into the cylinder head side, and check that air passes through easily.

        CAUTION:

        Do not suck air through the valve. Petroleum substances inside the valve are hazardous to your health.

      2. A01LG0MC07
        *a Clean Hose
        B0068HS Air

        Blow air into the intake manifold side and check that air passes through with difficulty.

        If the result is not as specified, replace the PCV valve sub-assembly.

    3. Remove the clean hose from the PCV valve sub-assembly.