DIFFERENTIAL PRESSURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL DIFFERENTIAL PRESSURE SENSOR

   
   
   1. 

      *a	Paint Mark

      Install the 2 air hoses to the differential pressure sensor, and slide the 2 clamps to secure the 2 hoses.

      Tech Tips

      Make sure the paint mark of the air hose side the differential pressure sensor.

   2. Connect the 2 air hoses to the No. 1 vacuum pipe and No. 2 vacuum pipe, and slide the 2 clamps to secure the 2 hoses.

   3. Install the differential pressure sensor to the pipe clamp with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   4. Connect the connector to the differential pressure sensor.

2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

   Click here