EGR COOLER INSTALLATION

PROCEDURE

1. Click here

   INSTALL NO. 1 EGR COOLER

   
   

   1. Install a new gasket and the No. 1 EGR cooler to the No. 2 EGR valve assembly with electric EGR control valve assembly with the 4 bolts.

      25 N*m

      255 kgf*cm

      18 ft.*lbf

2. Click here

   INSTALL NO. 1 EGR COOLER AND NO. 2 EGR VALVE ASSEMBLY WITH ELECTRIC EGR CONTROL VALVE ASSEMBLY

   
   

   1. Temporarily install the No. 1 EGR cooler and No. 2 EGR valve assembly with electric EGR control valve assembly to the intake manifold with the 4 bolts.

   2. 

      Tighten the 4 bolts in the order shown in the illustration.

      Note:

      Make sure to tighten the bolts in the order.

      21 N*m

      214 kgf*cm

      15 ft.*lbf

3. Click here

   INSTALL VACUUM CONTROL VALVE SET

   Click here

4. Click here

   INSTALL NO. 1 EGR PIPE SUB-ASSEMBLY (w/o DPF)

   Click here

5. Click here

   INSTALL EGR PIPE WITH COOLER SUB-ASSEMBLY (w/ DPF)

   Click here

6. Click here

   CONNECT NO. 4 WATER BY-PASS PIPE SUB-ASSEMBLY

   Click here

7. Click here

   INSTALL NO. 3 WATER BY-PASS PIPE SUB-ASSEMBLY

   
   

   1. Install the No. 3 water by-pass pipe sub-assembly to the No. 1 EGR cooler with the 2 bolts.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

   2. Connect the No. 9 water by-pass hose to the electric EGR control valve assembly, and slide the clamp to secure the hose.

   3. Connect the No. 8 water by-pass hose to the No. 3 water by-pass pipe sub-assembly, and slide the clamp to secure the hose.

   4. Connect the No. 4 fuel hose to the No. 3 water by-pass pipe sub-assembly.

8. Click here

   INSTALL NO. 2 EGR PIPE

   Click here

9. Click here

   INSTALL EGR VALVE BRACKET

   Click here

10. Click here

    CONNECT ENGINE WIRE

    Click here

11. Click here

    CONNECT FUEL FILTER ASSEMBLY

    Click here

12. Click here

    INSTALL NO. 2 ENGINE COVER BRACKET

    Click here

13. Click here

    INSTALL NO. 2 HOSE TO HOSE TUBE

    Click here

14. Click here

    INSTALL TURBO PRESSURE SENSOR

    Click here

15. Click here

    INSTALL GAS FILTER

    Click here

16. Click here

    INSTALL NO. 2 WATER BY-PASS PIPE

    Click here

17. Click here

    INSTALL DIESEL THROTTLE BODY ASSEMBLY

    Click here

18. Click here

    ADD ENGINE COOLANT

    Click here

19. Click here

    INSPECT FOR COOLANT LEAK

    Click here