EXHAUST GAS TEMPERATURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL EXHAUST GAS TEMPERATURE SENSOR


    1. B0068F6C01
      *a Torque Wrench Fulcrum Length

      Using a 14 mm union nut wrench, install the No. 3 exhaust gas temperature sensor to the exhaust manifold converter sub-assembly.

      Torque:
      Specified tightening torque
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Note

      If the No. 3 exhaust gas temperature sensor is dropped, replace the new one.

      Tech Tips


      • The connector color of the No. 3 exhaust gas temperature sensor is gray.

      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

        Click here

      • When using a union nut wrench (fulcrum length of 25 mm (0.984 in.)) + torque wrench (fulcrum length of 180 mm (7.09 in.)): 26.3 N*m (268 kgf*cm, 19 ft.*lbf)

    2. B0068F6C01
      *a Torque Wrench Fulcrum Length

      Using a 14 mm union nut wrench, install the No. 2 exhaust gas temperature sensor to the exhaust manifold converter sub-assembly.

      Torque:
      Specified tightening torque
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Note

      If the No. 2 exhaust gas temperature sensor is dropped, replace the new one.

      Tech Tips


      • The connector color of the No. 2 exhaust gas temperature sensor is black.

      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

        Click here

      • When using a union nut wrench (fulcrum length of 25 mm (0.984 in.)) + torque wrench (fulcrum length of 180 mm (7.09 in.)): 26.3 N*m (268 kgf*cm, 19 ft.*lbf)

    3. B0068F6C01
      *a Torque Wrench Fulcrum Length

      Using a 14 mm union nut wrench, install the exhaust gas temperature sensor to the exhaust manifold converter sub-assembly.

      Torque:
      Specified tightening torque
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Note

      If the exhaust gas temperature sensor is dropped, replace the new one.

      Tech Tips


      • The connector color of the exhaust gas temperature sensor is white.

      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

        Click here

      • When using a union nut wrench (fulcrum length of 25 mm (0.984 in.)) + torque wrench (fulcrum length of 180 mm (7.09 in.)): 26.3 N*m (268 kgf*cm, 19 ft.*lbf)

    4. B0025FEC01
      *a White
      *b Black
      *c Gray

      Attach the 3 colored connectors to the pipe clamp in the positions shown in the illustration.

    5. Close the clamp of the pipe clamp, and install the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    6. Connect the No. 3 exhaust gas temperature sensor to the No. 1 vacuum pipe.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    7. Connect the 3 connectors to the 3 exhaust gas temperature sensor.

  2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here