PCV VALVE INSPECTION

PROCEDURE


  1. INSPECT PCV VALVE SUB-ASSEMBLY


    1. Install a clean hose to the PCV valve sub-assembly.

    2. Check the PCV valve sub-assembly operation.


      1. A01L8UCC01
        *a Clean Hose
        *b Air

        Blow air into the cylinder head sub-assembly side and check that air passes through easily.

        CAUTION:

        Do not suck air through the PCV valve sub-assembly.

        Petroleum substances inside the PCV valve sub-assembly are hazardous to your health.

      2. A01LA2XC01
        *a Clean Hose
        *b Air

        Blow air into the intake air surge tank side and check that air passes through with difficulty.

        If the result is not as specified, replace the PCV valve sub-assembly.

    3. Remove the clean hose from the PCV valve sub-assembly.