FUEL SENDER GAUGE ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL FUEL SENDER GAUGE ASSEMBLY

   
   

   1. Set the fuel sender gauge assembly on the No. 1 fuel sub-tank. Then slide the fuel sender gauge assembly downward to install it.

      

      *A	for Long Wheelbase	*B	for Short Wheelbase
      *a	Slide	-	-

   2. Connect the wire harness and fuel sender gauge assembly connector.

2. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

   
   

   • for Long Wheelbase

     Click here

   • for Short Wheelbase

     Click here