FRONT CRANKSHAFT OIL SEAL INSTALLATION

PROCEDURE


  1. INSTALL TIMING CHAIN CASE OIL SEAL


    1. A01SBP5N01

      Apply MP grease to the lip of a new timing chain case oil seal.

      Note


      • Do not allow foreign matter to contact the lip of the timing chain case oil seal.

      • Do not allow MP grease to contact the dust seal.

    2. Temporarily install the timing chain case oil seal to the timing chain cover sub-assembly.

    3. Using SST and a hammer, tap in the timing chain case oil seal until its surface is flush with the timing chain cover edge.

      SST
      09223-75010
      09950-70010   ( 09951-07100 )

      Note


      • Keep the lip free from foreign matter.

      • Do not tap the timing chain case oil seal at an angle.

  2. INSTALL CRANKSHAFT PULLEY

    Click here

  3. INSTALL FAN SHROUD

    Click here

  4. INSPECT FOR OIL LEAK

    Click here

  5. INSPECT ENGINE OIL LEVEL

    Click here