FUEL PRESSURE REGULATOR REMOVAL

PROCEDURE


  1. DISCHARGE FUEL SYSTEM PRESSURE

    Click here

  2. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. REMOVE INTAKE AIR CONNECTOR

    Click here

  5. DISCONNECT NO. 2 FUEL HOSE

    Click here

  6. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY


    1. B0024BQ

      Disconnect the purge VSV connector.

    2. Disconnect the throttle body connector.

    3. Detach the wire harness clamp.

    4. B00273U

      Disconnect the vacuum hose.

    5. Remove the 3 bolts and fuel pressure regulator assembly.

    6. Remove the O-ring from the fuel pressure regulator assembly.