CAMSHAFT COMPONENTS
ILLUSTRATION
| *A | for 4WD and Pre-Runner | - | - |
| *1 | NO. 1 ENGINE COVER SUB-ASSEMBLY | *2 | NO. 1 ENGINE UNDER COVER ASSEMBLY |
| *3 | NO. 1 OIL RESERVOIR BRACKET | *4 | NO. 1 RADIATOR AIR GUIDE |
| *5 | NO. 2 AIR TUBE | *6 | NO. 4 AIR HOSE |
| *7 | RADIATOR RESERVE TANK ASSEMBLY | *8 | VANE PUMP OIL RESERVOIR ASSEMBLY |
| *9 | OIL RETURN HOSE | *10 | NO. 3 AIR TUBE |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *A | for Automatic Transmission | - | - |
| *1 | FAN SHROUD | *2 | NO. 1 OIL COOLER INLET HOSE |
| *3 | NO. 1 OIL COOLER OUTLET HOSE | *4 | NO. 1 RADIATOR HOSE |
| *5 | NO. 2 RADIATOR HOSE | *6 | RADIATOR ASSEMBLY |
| *7 | SUCTION HOSE SUB-ASSEMBLY | *8 | FAN WITH FLUID COUPLING ASSEMBLY |
| *9 | FAN PULLEY | *10 | FAN AND GENERATOR V BELT |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
ILLUSTRATION
| *A | w/o Heater | *B | w/ Heater |
| *C | w/ DPF | *D | for Cold Area Specification Vehicles |
| *E | except Cold Area Specification Vehicles | - | - |
| *1 | DIESEL THROTTLE BODY ASSEMBLY | *2 | ENGINE WIRE |
| *3 | FUEL FILTER ASSEMBLY | *4 | GAS FILTER |
| *5 | NO. 1 FUEL PIPE | *6 | NO. 2 ENGINE COVER BRACKET |
| *7 | NO. 2 HOSE TO HOSE TUBE | *8 | NO. 2 WATER BY-PASS PIPE |
| *9 | TURBO PRESSURE SENSOR | *10 | GASKET |
| *11 | EMISSION CONTROL VALVE WIRE | *12 | NO. 11 WATER BY-PASS HOSE |
| *13 | NO. 14 WATER BY-PASS HOSE | *14 | UNION BOLT |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *A | w/ DPF | - | - |
| *1 | EGR PIPE WITH COOLER SUB-ASSEMBLY | *2 | EGR VALVE BRACKET |
| *3 | NO. 1 EGR COOLER AND NO. 2 EGR VALVE ASSEMBLY WITH ELECTRIC EGR CONTROL VALVE ASSEMBLY | *4 | NO. 2 EGR PIPE |
| *5 | NO. 3 WATER BY-PASS PIPE SUB-ASSEMBLY | *6 | NO. 4 WATER BY-PASS PIPE SUB-ASSEMBLY |
| *7 | VACUUM CONTROL VALVE SET | *8 | NO. 4 FUEL HOSE |
| *9 | NO. 9 WATER BY-PASS HOSE | *10 | GASKET |
| *11 | NO. 8 WATER BY-PASS HOSE | *12 | WATER HOSE |
| *13 | NO. 7 WATER BY-PASS HOSE | *14 | NO. 17 WATER BY-PASS HOSE |
| *15 | ENGINE WIRE BRACKET | *16 | STUD BOLT |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *A | w/o DPF | - | - |
| *1 | EGR VALVE BRACKET | *2 | NO. 1 EGR COOLER AND NO. 2 EGR VALVE ASSEMBLY WITH ELECTRIC EGR CONTROL VALVE ASSEMBLY |
| *3 | NO. 1 EGR PIPE SUB-ASSEMBLY | *4 | NO. 2 EGR PIPE |
| *5 | NO. 3 WATER BY-PASS PIPE SUB-ASSEMBLY | *6 | NO. 4 WATER BY-PASS PIPE SUB-ASSEMBLY |
| *7 | VACUUM CONTROL VALVE SET | *8 | NO. 4 FUEL HOSE |
| *9 | NO. 9 WATER BY-PASS HOSE | *10 | GASKET |
| *11 | NO. 8 WATER BY-PASS HOSE | *12 | WATER HOSE |
| *13 | NO. 7 WATER BY-PASS HOSE | *14 | ENGINE WIRE BRACKET |
| *15 | STUD BOLT | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | HARNESS BRACKET | *2 | INJECTOR ASSEMBLY |
| *3 | NO. 1 INJECTION PIPE SUB-ASSEMBLY | *4 | NO. 2 INJECTION PIPE SUB-ASSEMBLY |
| *5 | NOZZLE HOLDER GASKET | *6 | NOZZLE LEAKAGE PIPE ASSEMBLY |
| *7 | WIRING HARNESS CLAMP BRACKET | *8 | GASKET |
| *9 | UNION BOLT | *10 | NO. 5 FUEL HOSE |
| *11 | WASHER | *12 | NOZZLE HOLDER CLAMP |
| *13 | NOZZLE HOLDER CLAMP BOLT | *14 | O-RING |
| *15 | INJECTION NOZZLE SEAT | - | - |
 |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | |
N*m (kgf*cm, ft.*lbf): Specified torque |
| * | For use with SST |  |
Engine oil |
| ● | Non-reusable part | - | - |
ILLUSTRATION
| *1 | CAMSHAFT POSITION SENSOR | *2 | CYLINDER HEAD COVER SUB-ASSEMBLY |
| *3 | OIL FILLER CAP SUB-ASSEMBLY | *4 | NOZZLE HOLDER CLAMP SEAT |
| *5 | CYLINDER HEAD COVER GASKET | *6 | CAMSHAFT BEARING CAP OIL HOLE GASKET |
| *7 | NO. 2 CYLINDER HEAD COVER GASKET | *8 | GASKET |
| *9 | OIL PUMP RELIEF VALVE PLUG | - | - |
| |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
ILLUSTRATION
| *1 | CAMSHAFT OIL SEAL RETAINER | *2 | NO. 1 CAMSHAFT |
| *3 | NO. 2 CAMSHAFT | *4 | NO. 3 CAMSHAFT BEARING CAP |
| *5 | TIMING CHAIN GUIDE | *6 | VACUUM PUMP ASSEMBLY |
| *7 | NO. 1 CAMSHAFT BEARING CAP | *8 | NO. 2 CAMSHAFT BEARING CAP |
| *9 | O-RING | *10 | NO. 2 CHAIN SUB-ASSEMBLY |
| *11 | CAMSHAFT TIMING SPROCKET | - | - |
| |
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | |
N*m (kgf*cm, ft.*lbf): Specified torque |
| ● | Non-reusable part | |
Engine oil |