CYLINDER BLOCK COMPONENTS
ILLUSTRATION
| *1 | CONNECTING ROD BEARING | *2 | CRANKSHAFT |
| *3 | UPPER CRANKSHAFT BEARING | *4 | CYLINDER BLOCK OIL ORIFICE |
| *5 | NO. 1 OIL NOZZLE SUB-ASSEMBLY | *6 | LOWER CRANKSHAFT BEARING |
| *7 | NO. 1 PISTON RING | *8 | NO. 2 PISTON RING |
| *9 | OIL RING | *10 | COIL |
| *11 | PISTON | *12 | SNAP RING |
| *13 | PISTON PIN | *14 | CONNECTING ROD |
| *15 | CONNECTING ROD CAP | *16 | UPPER CRANKSHAFT THRUST WASHER |
| *17 | CHECK VALVE | *18 | LOWER CRANKSHAFT THRUST WASHER |
| *19 | CRANKSHAFT BEARING CAP | - | - |
 |
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
| *T1 | 1st: 35 (357, 26) 2nd: Turn 90° |
*T2 | 1st: 50 (510, 37) 2nd: Turn 90° |