Click here

SFI SYSTEM REGISTRATION

Click here
Click here

CAUTION / NOTICE / HINT

Note:

The Vehicle Identification Number (VIN) or frame number must be written into a replacement ECM.

Tip:

The VIN is a 17-digit alphanumeric vehicle identification number. The GTS is required to register the VIN.

Click here

PROCEDURE


  1. Click here

    DESCRIPTION

    Tip:

    This registration section consists of 2 parts: Read VIN or Frame Number and Write VIN or Frame Number.


    1. Read VIN or Frame Number: This process allows the VIN or frame number stored in the ECM to be read in order to confirm that the VINs or frame numbers, provided on the vehicle body and stored in the vehicle ECM, are the same.

    2. Write VIN or Frame Number: This process allows the VIN or frame number to be written into the ECM. If the ECM is replaced, or the ECM VIN or frame number and vehicle VIN or frame number do not match, the VIN or frame number can be registered, or overwritten in the ECM by following this procedure.

  2. Click here

    READ VIN OR FRAME NUMBER


    1. Confirm the vehicle VIN or frame number.

    2. Connect the GTS to the DLC3.

    3. Turn the ignition switch to ON.

    4. Turn the GTS on.

    5. Enter the following menus: Powertrain / Engine and ECT / Utility / VIN / VIN Read.


      1. Powertrain > Engine > Utility
        Tester Display
        VIN




  3. Click here

    WRITE VIN OR FRAME NUMBER


    1. Confirm the vehicle VIN or frame number.

    2. Connect the GTS to the DLC3.

    3. Turn the ignition switch to ON.

    4. Turn the GTS on.

    5. Enter the following menus: Powertrain / Engine and ECT / Utility / VIN / VIN Write.


      1. Powertrain > Engine > Utility
        Tester Display
        VIN




    6. According to the display on the GTS, write the vehicle frame number or VIN to the ECM.