FUEL PRESSURE PULSATION DAMPER INSTALLATION

PROCEDURE


  1. INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY


    1. B0028TEC01
      *1 O-Ring

      Apply a light coat of gasoline or spindle oil to the O-ring.

    2. Install the fuel pressure pulsation damper assembly with the 2 bolts.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

  2. CONNECT NO. 1 FUEL HOSE

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  4. INSPECT FOR FUEL LEAK

    Click here