Click here

ECD SYSTEM, Diagnostic DTC:P0630

Click here
Click here
DTC Code DTC Name
P0630 VIN not Programmed or Mismatch - ECM / PCM
Click here

DESCRIPTION

DTC P0630 is set when the Vehicle Identification Number (VIN) is not stored in the ECM or the input VIN is not accurate. Input the VIN with the GTS.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory
P0630 VIN not Programmed or Mismatch - ECM / PCM

VIN not stored in ECM

Input VIN in ECM not accurate (1 Trip detection logic).

 ECM Comes on DTC stored
Click here

CAUTION / NOTICE / HINT

Tip:

Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.

Click here

PROCEDURE


  1. Click here

    CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0630)


    1. Connect an GTS to the DLC3.

    2. Turn the ignition switch to ON and turn the GTS ON.

    3. Enter the following menus: Powertrain / Engine / Trouble Codes.

    4. Read the DTCs.


      1. Powertrain > Engine > Trouble Codes


      Result
      Result Proceed to
      DTC P0630 is output A
      DTC P0630 and other DTCs are output B
      Note:

      If P0630 is set, the VIN must be input to the ECM using the GTS. However, all DTCs are cleared automatically by the GTS when inputting the VIN. If DTCs other than P0630 are set, check them first.

      Tip:

      If any DTCs other than P0630 are output, troubleshoot those DTCs first.


  2. Click here

    INPUT VIN WITH GTS


    1. Refer to the Registration.

      Click here

      Result
      Proceed to
      NEXT

    • NEXT

      END