AIR FUEL RATIO SENSOR INSTALLATION

PROCEDURE

1. INSTALL AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)

   Tech Tips

   Perform "Inspection After Repairs" after replacing the air fuel ratio sensor.

   Click here

   
   
   1. 

      *a	Torque Wrench Fulcrum Length

      Using SST, install the air fuel ratio sensor to the exhaust manifold.

      SST

      09224-00011

      Torque:

      Specified tightening torque

      44 N*m  { 449 kgf*cm, 32 ft.*lbf }

      Note

      Do not damage the air fuel ratio sensor.

      Tech Tips

      
      

      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

        Click here

      • When using SST (fulcrum length of 30 mm (1.18 in.)) + torque wrench (fulcrum length of 180 mm (7.09 in.)): 38 N*m (387 kgf*cm, 28 ft.*lbf)

   2. Connect the connector.

2. INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

   Tech Tips

   Perform "Inspection After Repairs" after replacing the air fuel ratio sensor.

   Click here

   
   
   1. 

      *a	Torque Wrench Fulcrum Length

      Using SST, install the air fuel ratio sensor to the exhaust manifold.

      SST

      09224-00011

      Torque:

      Specified tightening torque

      44 N*m  { 449 kgf*cm, 32 ft.*lbf }

      Note

      Do not damage the air fuel ratio sensor.

      Tech Tips

      
      

      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

        Click here

      • When using SST (fulcrum length of 30 mm (1.18 in.)) + torque wrench (fulcrum length of 180 mm (7.09 in.)): 38 N*m (387 kgf*cm, 28 ft.*lbf)

   2. Connect the connector.

3. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY LH

   Click here

4. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY RH

   Click here

5. INSPECT FOR EXHAUST GAS LEAK

   Click here