| Starter assembly | No-load characteristics current | Standard current | 100 A or less at 11.5 V |
| Magnet starter switch assembly | Terminal 50 - Terminal C | Standard resistance | Below 1 Ω |
| Terminal 50 - Switch body | Standard resistance | Below 2 Ω | |
| Starter brush holder assembly | Brush spring load | Standard spring load | 22 to 28 N (2 to 3 kgf, 4.9 to 6.3 lbf) |
| Minimum spring load | 12 N (1 kgf, 2.7 lbf) | ||
| Positive (+) brush holder - Negative (-) brush holder | Standard resistance | 10 kΩ or higher | |
| Brush length | Standard length | 15 mm (0.591 in.) | |
| Minimum length | 9.0 mm (0.354 in.) | ||
| Starter yoke assembly | Lead wire - Brush | Standard resistance | Below 1 Ω |
| Shunt coil terminal - Shunt coil terminal | Standard resistance | 1.5 to 1.9 Ω at 20°C (68°F) | |
| Brush length | Standard length | 15 mm (0.591 in.) | |
| Minimum length | 9.0 mm (0.354 in.) | ||
| Starter armature assembly | Segments | Standard resistance | Below 1 Ω |
| Segment - Coil core | Standard resistance | 10 kΩ or higher | |
| Commutator circle runout | Maximum runout | 0.05 mm (0.00197 in.) | |
| Commutator diameter | Standard diameter | 35 mm (1.38 in.) | |
| Minimum diameter | 34 mm (1.34 in.) | ||
| Commutator undercut depth | Standard undercut depth | 0.7 mm (0.0276 in.) | |
| Minimum undercut depth | 0.2 mm (0.00787 in.) |
| Starter assembly | No-load characteristics current | Standard current | 90 A or less at 11.5 V |
| Magnet starter switch assembly | Terminal 50 - Terminal C | Standard resistance | Below 1 Ω |
| Terminal 50 - Switch body | Standard resistance | Below 2 Ω | |
| Starter brush holder assembly | Brush spring load | Standard spring load | 16 to 20 N (1.7 to 2.0 kgf, 3.6 to 4.5 lbf) |
| Minimum spring load | 6.7 N (0.7 kgf, 1.5 lbf) | ||
| Positive brush holder - Negative brush holder | Standard resistance | 10 kΩ or higher | |
| Brush length | Standard length | 14.4 mm (0.567 in.) | |
| Minimum length | 9.0 mm (0.354 in.) | ||
| Starter armature assembly | Segments | Standard resistance | Below 1 Ω |
| Segment - Coil core | Standard resistance | 10 kΩ or higher | |
| Commutator circle runout | Maximum runout | 0.05 mm (0.00197 in.) | |
| Commutator diameter | Standard diameter | 29.0 mm (1.14 in.) | |
| Minimum diameter | 28.0 mm (1.10 in.) | ||
| Commutator undercut depth | Standard undercut depth | 0.7 mm (0.0276 in.) | |
| Minimum undercut depth | 0.2 mm (0.00787 in.) |
| Starter assembly | No-load characteristics current | Standard current | 90 A or less at 10.9 V |
| Tester connection | Condition | Specified condition |
|---|---|---|
| - | Lock | 10 kΩ or higher |
| 7 (ACC) - 5 (AM1) | ACC | Below 1 Ω |
| 8 (IG1) - 5 (AM1) 7 (ACC) - 5 (AM1) 4 (AM2) - 3 (IG2) |
ON | Below 1 Ω |
| 8 (IG1) - 5 (AM1) 6 (ST1) - 5 (AM1) 4 (AM2) - 3 (IG2) 4 (AM2) - 2 (ST2) |
START | Below 1 Ω |
| Item | Tester connection | Condition | Specified condition |
|---|---|---|---|
| Starter relay (ST NO. 1) | 3 - 5 | Battery voltage not applied to terminals 1 and 2 | 10 kΩ or higher |
| Battery voltage applied to terminals 1 and 2 | Below 1 Ω |