1GD-FTV STARTING SERVICE DATA

Click here

Table 1. Glow plug
Tester connection	Condition	Specified Condition
Glow plug terminal - Body ground	20°C (68°F)	Approximately 1.0 Ω

Table 2. Starter (for 2.0 kW Type)
Starter	Standard current	150A or less at 11.5 V
Starter armature assembly	Starter armature assembly	0.05 mm (0.00196 in.)
	Standard commutator diameter	29.0 mm (1.14 in.)
	Minimum commutator diameter	28.0 mm (1.10 in.)
	Standard undercut depth	0.7 mm (0.0276 in.)
	Minimum undercut depth	0.4 mm (0.0157 in.)
	Segment - Segment	Below 1.0 Ω
	Segment - Coil core	10 kΩ or higher
Starter brush holder assembly (Brush length)	Standard	10.4 mm (0.409 in.)
Starter brush holder assembly (Brush length)	Minimum	5.0 mm (0.197 in. )

Table 3. Starter (for 2.0 kW Type)
Item	Tester connection	Condition	Specified condition
Starter brush holder assembly	A-B C-D D-E	Always	Below 1 Ω
Magnet starter switch assembly.	Terminal 50 - Terminal C	Always	Below 1 Ω
Magnet starter switch assembly.	Terminal 50 - Switch body	Always	Below 2 Ω
Starter armature assembly.	Segment - Segment	Always	Below 1 Ω
Starter armature assembly.	Segment - Coil Core	Always	10 kΩ or higher

Table 4. Starter (for 2.2 kW Type)
Starter	Standard current	120A or less at 11 V

Table 5. Engine switch
Tester connection	Condition	Specified condition
5 (SS1) - 6(AGND) 1 (SS2) - 6(AGND)	Not pushed	10 kΩ or higher
5 (SS1) - 6(AGND) 1 (SS2) - 6(AGND)	Pushed	Below 1 Ω

Table 6. Ignition switch assembly.
Tester connection	Condition	Specified condition
-	Lock	10 kΩ or higher
7 (ACC) - 5 (AM1)	ACC	Below 1 Ω
8 (IG1) - 5 (AM1) 7 (ACC) - 5 (AM1) 4 (AM2) - 3 (IG2)	ON	Below 1 Ω
8 (IG1) - 5 (AM1) 6 (ST1) - 5 (AM1) 4 (AM2) - 3 (IG2) 4 (AM2) - 2 (ST2)	START	Below 1 Ω

Table 7. Starter relay assembly (ST NO. 1)
Tester connection	Condition	Specified condition
3 - 5	Battery voltage not applied to terminals 1 and 2	10 kΩ or higher
3 - 5	Battery voltage applied to terminals 1 and 2	Below 1 Ω

Table 8. Glow relay (GLOW)
Tester connection	Condition	Specified condition
3 - 5	Battery voltage not applied to terminals 1 and 2	10 kΩ or higher
3 - 5	Battery voltage applied to terminals 1 and 2	Below 1 Ω