Click here

CRANKSHAFT POSITION SENSOR INSPECTION

Click here
Click here

PROCEDURE


  1. Click here

    INSPECT CRANKSHAFT POSITION SENSOR


    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Cold 1630 to 2740 Ω
      1 - 2 Hot 2065 to 3225 Ω
      Note:

      In the chart above, the terms "cold" and "hot" refer to the temperature of the sensor. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).

      If the result is not as specified, replace the crankshaft position sensor.