DIESEL THROTTLE BODY REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the diesel throttle body assembly removal/installation are shown below.

Replacement Part or Procedure Necessary Procedures Effects/Inoperative when not Performed Link
Replacement of diesel throttle body assembly Perform initialization -

Click here

PROCEDURE


  1. REMOVE INTERCOOLER ASSEMBLY

    Click here

  2. REMOVE DIESEL THROTTLE BODY ASSEMBLY


    1. A01L9EZ

      Disconnect the diesel throttle body 2 connectors.

    2. A01LBWO

      Remove the 2 bolts, 2 nuts and the diesel throttle body assembly.

    3. Remove the gasket from the intake air connector.