FRONT WIPER RUBBER INSTALLATION

CAUTION / NOTICE / HINT

Note

Make sure to hold the front wiper arm while lifting it as lifting the front wiper arm by the front wiper blade may damage or deform the front wiper blade.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the LH and RH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL WIPER RUBBER

    Tech Tips

    The wiper rubber can be installed from either end of the front wiper blade.


    1. A0026KOC01
      *a Slit
      B006JFV Install in this Direction

      Insert the wiper rubber through the slit in the front wiper blade as shown in the illustration.

    2. Pull the wiper rubber as indicated by the arrows, in the order shown in the illustration, until its end is aligned with the slits in the front wiper blade.

      A0026QWC01
      *a Slit - -
    3. A0026R7C01
      *a End Of Shield Cap

      Slide the wiper rubber in the direction indicated by the arrow shown in the illustration to install it.

      Note

      Make sure that each end of the wiper rubber is fully inserted into each shield cap.

  2. INSTALL FRONT WIPER BLADE


    1. Insert the protrusion of the front wiper arm into the groove of the front wiper blade in the direction indicated by the arrow (1) shown in the illustration.

      A0026H7C01
      *a Protrusion of Front Wiper Arm *b Groove of Front Wiper Blade
      *c Lock Button - -
      B006JFV Install in this Direction (1) B006JHL Install in this Direction (2)

    2. Slide the front wiper blade in the direction indicated by the arrow (2) shown in the illustration until the lock button locks to install the front wiper blade.

      Note

      Make sure that the lock button locks so that it is installed securely.