BACK DOOR OUTSIDE GARNISH INSTALLATION

PROCEDURE


  1. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY


    1. B003LFA

      Attach the 3 clips to install the back door outside garnish sub-assembly.

    2. Remove the protective tape.

    3. B003L58

      Install the 5 nuts.

      Torque:
      4.9 N*m  { 50 kgf*cm, 43 in.*lbf }
  2. INSTALL REAR LIGHT ASSEMBLY LH

    Click here

  3. INSTALL REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  4. INSTALL BACK DOOR DAMPER ASSEMBLY

    Click here

  5. INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)

    Click here

  6. INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door)

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL BACK DOOR SERVICE HOLE COVER (w/ Cover)

    Click here

  8. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  9. INSTALL DOOR PULL HANDLE

    Click here

  10. INSTALL BACK DOOR SIDE GARNISH LH

    Click here

  11. INSTALL BACK DOOR SIDE GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

  12. INSTALL CENTER BACK DOOR GARNISH

    Click here