BACK DOOR OUTSIDE GARNISH INSTALLATION

PROCEDURE

1. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY

   
   

   1. 

      Attach the 3 clips to install the back door outside garnish sub-assembly.

   2. Remove the protective tape.

   3. 

      Install the 5 nuts.

      Torque:

      4.9 N*m  { 50 kgf*cm, 43 in.*lbf }

2. INSTALL REAR LIGHT ASSEMBLY LH

   Click here

3. INSTALL REAR LIGHT ASSEMBLY RH

   Tech Tips

   Use the same procedure described for the LH side.

4. INSTALL BACK DOOR DAMPER ASSEMBLY

   Click here

5. INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)

   Click here

6. INSTALL POWER BACK DOOR SENSOR ASSEMBLY RH (w/ Power Back Door)

   Tech Tips

   Use the same procedure described for the LH side.

7. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

   Click here

8. INSTALL DOOR PULL HANDLE

   Click here

9. INSTALL BACK DOOR SIDE GARNISH LH

   Click here

10. INSTALL BACK DOOR SIDE GARNISH RH

    Tech Tips

    Use the same procedure described for the LH side.

11. INSTALL CENTER BACK DOOR GARNISH

    Click here