BACK DOOR OUTSIDE GARNISH REASSEMBLY

PROCEDURE


  1. INSTALL NO. 3 BACK DOOR OUTSIDE GARNISH PROTECTOR

    Tech Tips


    • When installing the No. 3 back door outside garnish protector, heat the back door outside garnish sub-assembly surface using a heat light.

    • Use the same procedure for both No. 3 back door outside garnish protectors.

    Standard
    Item Temperature
    Back Door Outside Garnish Sub-assembly 20 to 30°C (68 to 86°F)

    1. Clean the back door outside garnish sub-assembly surface.


      1. Using a heat light, heat the back door outside garnish sub-assembly surface.

      2. Remove the double-sided tape from the back door outside garnish sub-assembly surface.

      3. Wipe off any tape adhesive residue with cleaner.

    2. B003Q4SC01
      *a Mark-off Line

      Install a new No. 3 back door outside garnish protector.


      1. Using a heat light, heat the back door outside garnish.

      2. Remove the peeling paper from the face of the No. 3 back door outside garnish protector.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 3 back door outside garnish protector as shown in the illustration.

        Tech Tips

        Press the back door outside garnish protector firmly to install it.

        Standard
        Area Specified Condition
        A 1.5 mm (0.0591 in.)
        B 1.5 mm (0.0591 in.)

  2. INSTALL NO. 2 BACK DOOR OUTSIDE GARNISH PROTECTOR

    Tech Tips


    • When installing the No. 2 back door outside garnish protector, heat the back door outside garnish sub-assembly surface using a heat light.

    • Use the same procedure for both No. 2 back door outside garnish protectors.

    Standard
    Item Temperature
    Back Door Outside Garnish Sub-assembly 20 to 30°C (68 to 86°F)

    CAUTION:


    • Do not touch the heat light and heated parts.

    • Touching the heat light may result in burns.

    • Touching heated parts for a long time may result in burns.

    B003OCCC23
    *a Heated Part
    *b Heat Light

    1. Clean the back door outside garnish surface.


      1. Using a heat light, heat the back door outside garnish sub-assembly surface.

      2. Remove the double-sided tape from the back door outside garnish sub-assembly surface.

      3. Wipe off any tape adhesive residue with cleaner.

    2. B003P74

      Install a new No. 2 back door outside garnish protector.


      1. Using a heat light, heat the back door outside garnish.

      2. Remove the peeling paper from the face of the No. 2 back door outside garnish protector.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 2 back door outside garnish protector as shown in the illustration.

        Tech Tips

        Press the back door outside garnish protector firmly to install it.

  3. INSTALL NO. 1 BACK DOOR OUTSIDE GARNISH PROTECTOR

    Tech Tips


    • When installing the No. 1 back door outside garnish protector, heat the back door outside garnish sub-assembly surface using a heat light.

    Standard
    Item Temperature
    Back Door Outside Garnish Sub-assembly 20 to 30°C (68 to 86°F)

    1. Clean the back door outside garnish surface.


      1. Using a heat light, heat the back door outside garnish sub-assembly surface.

      2. Remove the double-sided tape from the back door outside garnish sub-assembly surface.

      3. Wipe off any tape adhesive residue with cleaner.

    2. B003LFLC01
      *a Mark-off Line

      Install a new No. 1 back door outside garnish protector.


      1. Using a heat light, heat the back door outside garnish.

      2. Remove the peeling paper from the face of the No. 1 back door outside garnish protector.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 1 back door outside garnish protector as shown in the illustration.

        Tech Tips

        Press the back door outside garnish protector firmly to install it.

        Standard
        Area Specified Condition
        A 1.5 mm (0.0591 in.)
        B 1.5 mm (0.0591 in.)

  4. INSTALL BACK DOOR NAME PLATE

    Click here