ROOF DRIP SIDE FINISH MOULDING REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE ROOF RACK ASSEMBLY LH (w/ Roof Rack)

    Click here

  2. REMOVE ROOF DRIP SIDE FINISH MOULDING LH (w/ Roof Rack)


    1. B003Q9YC01
      B003KT0 Protective Tape

      Put protective tape around the roof drip side finish moulding LH.

    2. B003P40

      Using moulding remover D, detach the clip and remove the roof drip side finish moulding LH.

      Note


      • When removing the roof drip side finish moulding LH, be careful not to damage the clips.

      • If a clip is damaged or becomes detached from the vehicle, replace it with a new one.

  3. REMOVE ROOF DRIP SIDE FINISH MOULDING LH (w/o Roof Rack)


    1. B003MROC01
      B003KT0 Protective Tape

      Put protective tape around the roof drip side finish moulding LH.

    2. B003QLC

      Using moulding remover D, detach the clip and remove the roof drip side finish moulding LH.

      Note


      • When removing the roof drip side finish moulding LH, be careful not to damage the clips.

      • If a clip is damaged or becomes detached from the vehicle, replace it with a new one.