SIDE STEP REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL NO. 1 SIDE STEP STAY SUB-ASSEMBLY LH


    1. Install the No. 2 nose piece to an air riveter or hand riveter.

      B003N2D

    2. Insert the mandrel part of 2 new rivets into the nose piece.

    3. Using the riveter, install the No. 1 side step stay sub-assembly LH to the step plate LH with the 2 rivets as shown in the illustration.

      Note


      • B003NYQC33
        *a INCORRECT
        *b CORRECT
        *c Riveter
        *d Mandrel

        Do not pry the rivet with the riveter as this will cause damage to the riveter and mandrel.

      • B003S8DC33
        *a INCORRECT
        *b CORRECT
        *c Riveter

        Confirm that the rivets are seated properly against the No. 1 side step stay.

      • Do not tilt the riveter when installing the rivet to the No. 1 side step stay.

      • Do not leave any space between the rivet head and No. 1 side step stay.

      • B003LP0C32
        *a INCORRECT
        *b CORRECT
        *c Riveter

        Do not leave any space between the No. 1 side step stay and step plate. Firmly hold together the 2 items while installing the rivet.

  2. INSTALL NO. 2 SIDE STEP BRACKET LH


    1. Install the No. 2 nose piece to an air riveter or hand riveter.

      B003M8L

    2. Insert the mandrel part of 2 new rivets into the nose piece.

    3. Using the riveter, install the No. 2 side step bracket LH to the step plate LH with the 2 rivets as shown in the illustration.

      Note


      • B003NYQC33
        *a INCORRECT
        *b CORRECT
        *c Riveter
        *d Mandrel

        Do not pry the rivet with the riveter as this will cause damage to the riveter and mandrel.

      • B003S8DC33
        *a INCORRECT
        *b CORRECT
        *c Riveter

        Confirm that the rivets are seated properly against the No. 2 side step bracket.

      • Do not tilt the riveter when installing the rivet to the No. 2 side step bracket.

      • Do not leave any space between the rivet head and No. 2 side step bracket.

      • B003LP0C32
        *a INCORRECT
        *b CORRECT
        *c Riveter

        Do not leave any space between the No. 2 side step bracket and step plate. Firmly hold together the 2 items while installing the rivet.

  3. INSTALL NO. 3 SIDE STEP BRACKET LH


    1. Install the No. 2 nose piece to an air riveter or hand riveter.

      B003MN6

    2. Insert the mandrel part of 2 new rivets into the nose piece.

    3. Using the riveter, install the No. 3 side step bracket LH to the step plate LH with the 2 rivets as shown in the illustration.

      Note


      • B003NYQC33
        *a INCORRECT
        *b CORRECT
        *c Riveter
        *d Mandrel

        Do not pry the rivet with the riveter as this will cause damage to the riveter and mandrel.

      • B003S8DC33
        *a INCORRECT
        *b CORRECT
        *c Riveter

        Confirm that the rivets are seated properly against the No. 3 side step bracket.

      • Do not tilt the riveter when installing the rivet to the No. 3 side step bracket.

      • Do not leave any space between the rivet head and No. 3 side step bracket.

      • B003LP0C32
        *a INCORRECT
        *b CORRECT
        *c Riveter

        Do not leave any space between the No. 3 side step bracket and step plate. Firmly hold together the 2 items while installing the rivet.

  4. INSTALL STEP PLATE COVER LH


    1. Attach the claw and guide and install the step plate cover LH.

    2. Install the 2 bolts.

      Torque:
      4.0 N*m  { 41 kgf*cm, 35 in.*lbf }