WHEEL OPENING MOULDING(for Rear) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR BUMPER COVER

    Click here

  2. REMOVE QUARTER OUTSIDE MOULDING SUB-ASSEMBLY LH

    Tech Tips

    When removing the quarter outside moulding sub-assembly LH, heat the vehicle body and quarter outside moulding sub-assembly LH using a heat light.

    Standard
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Quarter Outside Moulding Sub-assembly LH 20 to 30°C (68 to 86°F)

    CAUTION:


    • Do not touch the heat light and heated parts.

    • Touching the heat light may result in burns.

    • Touching heated parts for a long time may result in burns.

    B003OCCC23
    *a Heated Part
    *b Heat Light

    1. B003KKHC01
      B003KT0 Protective Tape

      Put protective tape around the quarter outside moulding sub-assembly LH.

    2. B003JW3

      Remove the retainer.

    3. Detach the clip and remove the quarter outside moulding sub-assembly LH.

      B003RH8C01
      *a Double-sided Tape - -
      B003R2S Order of Removal B003QBX Place Hands Here
      B003OFB Remove in this Direction - -