FRONT BUMPER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart.

Click here

PROCEDURE


  1. INSTALL FRONT BUMPER SIDE SUPPORT LH


    1. B003O94C01
      B003OFB Install in this Direction

      Attach the claw to install the front bumper side support LH as shown in the illustration.

    2. Install the bolt.

  2. INSTALL FRONT BUMPER SIDE SUPPORT RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    1. B003QMRC01
      B003OFB Install in this Direction

      Install the front bumper reinforcement sub-assembly with the 4 bolts.

      Torque:
      26 N*m  { 265 kgf*cm, 19 ft.*lbf }

  4. INSTALL FRONT BUMPER ENERGY ABSORBER SUB-ASSEMBLY


    1. B003OAEC01
      B003OFB Install in this Direction

      Attach the clip to install the front bumper energy absorber sub-assembly as shown in the illustration.

  5. INSTALL FRONT BUMPER STONE DEFLECTOR LH


    1. B003OTCC01
      B003OFB Install in this Direction

      Attach the claw and guide to install the front bumper stone deflector LH as shown in the illustration.

  6. INSTALL FRONT BUMPER STONE DEFLECTOR RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. INSTALL FRONT BUMPER NO. 2 SIDE SUPPORT LH


    1. B003LUA

      Install the front bumper No. 2 side support LH with the 2 bolts.

  8. INSTALL FRONT BUMPER NO. 2 SIDE SUPPORT RH

    Tech Tips

    Use the same procedure described for the LH side.

  9. INSTALL RADIATOR SIDE DEFLECTOR LH


    1. B003RL8C01
      B003OFB Install in this Direction

      Attach the claw and install the radiator side deflector LH as shown in the illustration.

  10. INSTALL RADIATOR SIDE DEFLECTOR RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. INSTALL FRONT BUMPER NO. 2 ENERGY ABSORBER


    1. B003QIJC01
      B003OFB Install in this Direction

      Install the front bumper No. 2 energy absorber with the 3 bolts as shown in the illustration.

  12. INSTALL FRONT BUMPER COVER


    1. B003O9NC01
      B003OFB Install in this Direction

      Install the front bumper cover as shown in the illustration.

    2. Connect the fog light connector.

    3. B003R46C01
      B003OFB Install in this Direction

      Attach the claw as shown in the illustration.

      Tech Tips

      Use the same procedure for the claw on the other side.

    4. B003JYK

      Install the 3 screws and 2 clips.

    5. B003OT2C02
      *a Bolt
      *b Screw

      Install the 2 screws and 2 bolts.

    6. Remove the protective tape.

    7. B003LPJC02
      *a Bolt
      *b Screw

      Install the 6 screws and 3 bolts.

    8. B003NEPC01
      *a CORRECT
      *b INCORRECT

      Install the pin hold clip.

      Tech Tips

      Use the same procedure for the pin hold clip on the other side.

    9. Install the screw.

      Tech Tips

      Use the same procedure for the screw on the other side.

  13. INSTALL NO. 1 RADIATOR GRILLE RETAINER


    1. B003MIK

      Install the 8 clips and No. 1 radiator grille retainer.

  14. ADJUST FOG LIGHT AIMING

    Click here