HEIGHT CONTROL SENSOR INSTALLATION

PROCEDURE

1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH

   Note

   If the rear height control sensor sub-assembly LH has been dropped, replace it with a new one.

   
   

   1. Install the rear height control sensor sub-assembly LH with new 2 bolts.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   2. Connect the link rod with a new nut.

      Torque:

      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

   3. Connect the connector.

2. PERFORM INITIALIZATION

   Click here

3. INSPECT AUTOMATIC LIGHT CONTROL SYSTEM

   Click here

4. INSPECT HEADLIGHT AIMING

   Click here