STOP LIGHT SWITCH INSTALLATION

PROCEDURE


  1. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER


    1. B003L07

      Attach the claw to install a new stop light switch mounting adjuster.

  2. INSTALL STOP LIGHT SWITCH ASSEMBLY


    1. B003NMN

      Insert the stop light switch assembly into the stop light switch mounting adjuster until the switch body slightly touches the brake pedal.

      Note

      Do not depress the brake pedal.

    2. B003J3IC01
      *a Protrusion Amount Measurement Area

      Rotate the stop light switch assembly clockwise by approximately one fourth of a rotation.

    3. Check the protrusion amount of the shaft.

      Standard
      0.5 to 2.6 mm (0.0197 to 0.1024 in.)

    4. Connect the connector.

  3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here