STOP LIGHT SWITCH REMOVAL

PROCEDURE

1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

2. REMOVE STOP LIGHT SWITCH ASSEMBLY

   
   

   1. 

      Disconnect the connector.

   2. Turn the stop light switch assembly counterclockwise and remove it.

3. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

   
   

   1. 

      Protective Tape

      Using a screwdriver, detach the claw and remove the stop light switch mounting adjuster.

      Note

      The stop light switch mounting adjuster must not be reused.

      Tech Tips

      Tape the screwdriver tip before use.