LICENSE PLATE LIGHT BULB REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE LICENSE PLATE LIGHT BULB


    1. B003MXAC01
      *a Insert in Hole
      B003KT0 Protective Tape
      B003OFB Push in this Direction

      Insert a screwdriver into the hole of the license plate light lens.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Slightly push the screwdriver in the direction indicated by the arrow shown in the illustration to widen the license plate light lens with the tip of the screwdriver to detach the claw.

    3. Detach the remaining claw and remove the license plate light lens.

    4. B003NZN

      Remove the license plate light bulb.

  2. INSTALL LICENSE PLATE LIGHT BULB


    1. Install the license plate light bulb.

    2. B003MNZ

      Attach the claw to install the license plate light lens.