REAR LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR LIGHT ASSEMBLY LH


    1. B003REEC01
      *a

      Component without harness connected

      (Rear Light Assembly LH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → V8-1 (TL)

      Battery negative (-) → V8-2 (E)

      		 Illuminates

  2. INSPECT REAR LIGHT ASSEMBLY RH


    1. B003REEC02
      *a

      Component without harness connected

      (Rear Light Assembly RH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → V7-1 (TL)

      Battery negative (-) → V7-2 (E)

      		 Illuminates