REAR LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE BACK DOOR CENTER GARNISH

    Click here

  2. REMOVE BACK DOOR SIDE GARNISH LH

    Click here

  3. REMOVE BACK DOOR SIDE GARNISH RH

    Click here

  4. REMOVE DOOR PULL HANDLE

    Click here

  5. REMOVE BACK DOOR TRIM BOARD ASSEMBLY

    Click here

  6. REMOVE POWER BACK DOOR SENSOR ASSEMBLY LH (w/ Power Back Door)

    Click here

  7. REMOVE REAR NO. 3 SPEAKER ASSEMBLY (w/ Back Door Speaker)

    Click here

  8. REMOVE BACK DOOR SERVICE HOLE COVER (w/ Cover)

    Click here

  9. REMOVE REAR LIGHT ASSEMBLY LH


    1. B003LYPC01
      B003KT0 Protective Tape

      Apply protective tape around the rear light assembly LH.

    2. B003O07

      Disconnect the connector.

    3. Remove the 3 nuts.

    4. B003OBCC01
      B003OFB Remove in this Direction

      Pull the rear light assembly LH toward the rear of the vehicle to remove it.