SIDE TURN SIGNAL LIGHT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH


    1. B003KB7C01
      *a

      Component without harness connected

      (Side Turn Signal Light Assembly LH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 2

      Battery negative (-) → Terminal 1

      		 Illuminates

      If the result is not as specified, replace the side turn signal light assembly LH.

  2. INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH


    1. B003KB7C01
      *a

      Component without harness connected

      (Side Turn Signal Light Assembly RH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Condition Specified Condition

      Battery positive (+) → Terminal 1

      Battery negative (-) → Terminal 2

      		 Illuminates

      If the result is not as specified, replace the side turn signal light assembly RH.