SIDE TURN SIGNAL LIGHT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE OUTER MIRROR LH

    Click here

  2. REMOVE OUTER MIRROR COVER LH

    Click here

  3. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH


    1. B003PYL

      Remove the 2 screws.

    2. B003LMPC01
      B003KT0 Protective Tape

      Using a screwdriver, detach the claw.

      Tech Tips

      Tape the screwdriver tip before use.

    3. B003NNBC01
      B003OFB Remove in this Direction

      Detach the claw and remove the under cover together with the side turn signal light assembly LH.

    4. B003MYE

      Detach the wire harness clamp and disconnect the connector.