FRONT TURN SIGNAL LIGHT BULB REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT TURN SIGNAL LIGHT BULB (for Halogen Headlight)


    1. B003MUDC01
      *a Matchmark
      *b Unlock Position Mark
      B003OFB Counterclockwise

      Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.

    2. B003PWT

      Remove the front turn signal light bulb.

  2. REMOVE FRONT TURN SIGNAL LIGHT BULB (for LED Headlight)


    1. B003POHC01
      *a Matchmark
      *b Unlock Position Mark
      B003OFB Counterclockwise

      Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock position mark to disconnect the bulb socket.

    2. B003PWT

      Remove the front turn signal light bulb.

  3. INSTALL FRONT TURN SIGNAL LIGHT BULB (for Halogen Headlight)


    1. Install the front turn signal light bulb.

    2. B003KM5C01
      *a Matchmark
      *b Unlock Position Mark
      *c Lock Position Mark
      B003OFB Clockwise

      Align the matchmark of the bulb socket with the unlock position mark, and then rotate the bulb socket clockwise until the lock position mark to connect the bulb socket.

  4. INSTALL FRONT TURN SIGNAL LIGHT BULB (for LED Headlight)


    1. Install the front turn signal light bulb.

    2. B003RKBC01
      *a Matchmark
      *b Unlock Position Mark
      *c Lock Position Mark
      B003OFB Clockwise

      Align the matchmark of the bulb socket with the unlock position mark, and then rotate the bulb socket clockwise until the lock position mark to connect the bulb socket.