HEADLIGHT ASSEMBLY(for LED Headlight) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT ASSEMBLY LH


    1. Attach the wire harness clamp and connect the 3 connectors.

    2. B003LGRC01
      B003QBX Connect the Seat of the Screw.
      B003OFB Install in this Direction

      Push the headlight assembly LH backward and connect the bracket to the seat of the screw.

      Note

      Be careful not to break the bracket.

    3. Install the 3 screws and bolt.

  2. INSTALL FRONT BUMPER COVER

    Click here

  3. ADJUST HEADLIGHT AIMING

    Click here

  4. ADJUST FOG LIGHT AIMING

    Click here