HEADLIGHT ASSEMBLY(for LED Headlight) REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL HEADLIGHT RIM LH


    1. Attach the claw to install the headlight rim LH.

    2. Install the 3 screws.

  2. INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING


    1. Install a new headlight leveling motor base packing.

  3. INSTALL HEADLIGHT LEVELING MOTOR LH


    1. Set the tip of the aiming screw of the headlight leveling motor LH onto the headlight unit.

    2. Tighten the aiming screw of the headlight leveling motor LH the same number of rotations recorded when removing it to connect the headlight leveling motor LH.

    3. B003KIWC01
      *a Aiming Screw
      B003OFB Tighten in this Direction
      B003QYY Clockwise

      Insert the headlight leveling motor LH.

    4. Turn the headlight leveling motor LH clockwise to install it.

      Tech Tips

      For the headlight assembly RH, turn the headlight leveling motor RH counterclockwise to install it.

    5. Tighten the aiming screw 20 rotations.

  4. INSTALL FRONT TURN SIGNAL LIGHT BULB


    1. Install the front turn signal light bulb.

  5. INSTALL FRONT TURN SIGNAL LIGHT SOCKET

    B003JO3C01
    *a Matchmark
    *b Unlock Position Mark
    *c Lock Position Mark
    B003OFB Clockwise

    1. Align the matchmark of the front turn signal light socket with the unlock position mark of the headlight unit, and then rotate the front turn signal light socket clockwise until the lock position mark to install the front turn signal light socket.