FRONT CONSOLE BOX REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for RHD vehicles

PROCEDURE


  1. REMOVE INSTRUMENT PANEL REGISTER BEZEL GARNISH

    Click here

  2. REMOVE NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

  3. REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY

    Click here

  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. for Automatic Transmission:


      1. B003NVXC01
        B003OFB Remove in this Direction

        Twist the shift lever knob sub-assembly as shown in the illustration and remove it.

    2. for Manual Transmission:


      1. B003PTJC01
        B003OFB Remove in this Direction

        Twist the shifting hole cover as shown in the illustration and disconnect it.

      2. B003PAIC01
        B003OFB Remove in this Direction

        Twist the shift lever knob sub-assembly as shown in the illustration and remove it.

  5. REMOVE SHIFTING HOLE COVER SUB-ASSEMBLY (for Automatic Transmission)


    1. B003NLWC01
      *a Protective Tape

      Put protective tape around the shifting hole cover sub-assembly.

    2. B003RNZC01
      B003QBX Insert Moulding Remover B Here
      B003OFB Remove in this Direction

      Insert moulding remover B at the position shown in the illustration and pull as shown to detach the claw and clip and remove the shifting hole cover sub-assembly.

  6. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. for Automatic Transmission:


      1. B003P97C01
        *a Protective Tape

        Put protective tape around the upper console panel sub-assembly.

      2. B003KOKC01
        B003QBX Place Hands Here
        B003OFB Remove in this Direction

        Place your hands at the position shown in the illustration and pull as shown to detach the clip and guide.

      3. Disconnect the connector.

      4. B003O4FC01
        B003OFB Remove in this Direction

        Pull as shown in the illustration to remove the upper console panel sub-assembly.

    2. for Manual Transmission:


      1. B003K51C01
        *a Protective Tape

        Put protective tape around the upper console panel sub-assembly.

      2. B003PGHC01
        B003QBX Place Hands Here
        B003OFB Remove in this Direction

        Place your hands at the position shown in the illustration and pull as shown to detach the clip and guide.

      3. Disconnect the connector.

      4. B003PRVC01
        B003OFB Remove in this Direction

        Pull as shown in the illustration to remove the upper console panel sub-assembly.

  7. REMOVE BOX BOTTOM MAT


    1. B003O6D

      Remove the box bottom mat.

  8. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY


    1. B003LCFC01
      *a Protective Tape

      Put protective tape around the rear console end panel sub-assembly.

    2. B003SE1

      Remove the screw.

    3. B003QP1C01
      B003QBX Place Hands Here
      B003OFB Remove in this Direction

      Place your hands at the position shown in the illustration and pull as shown to detach the clip and claw.

    4. Disconnect the connector and remove the rear console end panel sub-assembly.

  9. REMOVE CONSOLE BOX CARPET


    1. B003JR2

      Remove the console box carpet.

  10. REMOVE CONSOLE BOX ASSEMBLY


    1. for Automatic Transmission:


      1. B003LST

        Remove the 2 bolts.

      2. B003KZZ

        Disconnect the connector and detach the clamp.

      3. B003QM2

        Remove the 3 screws.

      4. B003RALC01
        B003OFB Remove in this Direction (1)
        B003QYY Remove in this Direction (2)

        Pull as shown in the illustration to remove the console box assembly.

    2. for Manual Transmission:


      1. B003LST

        Remove the 2 bolts.

      2. B003KZZ

        Disconnect the connector and detach the clamp.

      3. B003J4S

        Remove the 4 screws.

      4. B003S5UC01
        B003OFB Remove in this Direction (1)
        B003QYY Remove in this Direction (2)

        Pull as shown in the illustration to remove the console box assembly.