RELAY(for Manual Cooler System) INSPECTION

PROCEDURE


  1. INSPECT REAR COOLER RELAY


    1. B003KRZC01
      *a

      Component without harness connected

      (Rear Cooler Relay)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 4 Battery voltage not applied to terminals 3 and 5 Below 1 Ω
      1 - 2 Battery voltage not applied to terminals 3 and 5 10 kΩ or higher
      Battery voltage applied to terminals 3 and 5 Below 1 Ω

      If the result is not as specified, replace the rear cooler relay.